KitchenAid Blender KSB655 User Manual download pdf (Page 12)

10

ENGLISH

Using the Blender

Before Use

NOTE: While the Blender is on or the

PULSE MODE indicator light is blinking:

- Do not interfere with blade movement

- Do not remove pitcher or accessory jar lid

Operating the Blender with the

Pitcher or Accessory Jar

The KitchenAid

®

Blender has five speeds:

STIR, CHOP, MIX, PURÉE and LIQUEFY. In

addition, it also features CRUSH ICE and

PULSE MODE.

1. With convenient one-step operation,

this unit will operate only when a

speed selection button is pressed.

2. Before operating the Blender, make

sure the pitcher or accessory jar is

properly secured in the locking collar

and assembly is positioned on the

Blender base.

NOTE: If a gap exists between the locking

collar and the base, the pitcher or accessory

jar might not be locked into the locking

collar or the assembly is not positioned

properly on the Blender base. See Blender

Assembly, page 8 for further instructions.

3. Put ingredients into the pitcher or

accessory jar. To attach pitcher lid, push

firmly into place. To attach the accessory

jar lid, twist to lock onto the accessory jar.

4. Press the desired speed button for

continuous operation at that speed.

The red indicator light above the

selected speed will stay lit. You may

change settings without stopping the

unit by pressing a new speed button.

IMPORTANT: If blending hot foods or

liquids, remove the center ingredient cup.

Operate only on STIR speed.

5. To turn off the Blender, press OFF.

The Off button will stop any speed

and deactivate the Blender at the

same time.

6. Before removing the pitcher or

accessory jar assembly, unplug the

power cord.

CRUSH ICE

Your KitchenAid

®

Blender offers a CRUSH

ICE feature. When selected, the Blender

will automatically pulse at staggered

intervals at the optimal speed for crushing

ice or other ingredients.

1. Before operating the Blender, make

sure the pitcher or accessory jar

assembly is properly positioned on the

Blender base.

NOTE: If a gap exists between the

locking collar and the base, the pitcher or

accessory jar might not be locked into the

locking collar or the collar is not positioned

properly on the Blender base. See Blender

Assembly, page 8 for further instructions.

2. Put ingredients into the pitcher or

accessory jar. To attach pitcher lid, push

firmly into place. To attach the accessory

jar lid, twist to lock onto the accessory jar.

3. Press CRUSH ICE. The indicator light will

stay lit. The Blender will automatically

pulse at staggered intervals.

Gap

No

Gap

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Comments to this Manuals

No comments