KitchenAid KDSCM 82141 Instruction for Use Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
Options and functions
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
DELAY
The start time of the program may be de-
layed for a period of time between 1 and 12
hours.
1.Press the DELAY button: the corresponding
symbol appears on the display; each time
you press the button, the time (1h, 2h, etc.
up to max. 12h) from the start of the
selected wash cycle will be increased.
2.Select the wash program and close the
door: the timer will begin counting down;
3.Once this time has elapsed, the indicator
light switches off and the wash cycle begins.
To adjust the delay time and select a shorter
period of time, press the DELAY button.
To cancel it, press the button repeatedly un-
til the selected delayed start indicator light
switches off.
The wash program will start automatically
as soon as the door is shut.
The Delay function cannot be set once a
wash cycle has been started.
MULTIZONE
If there are not many dishes to be washed,
a half loading may be used in order to save
water, electricity and detergent.
Select the program and then press the
MULTIZONE button: the indicator over the
button lights up and the symbol of the chosen
rack will appear on the display. By default
the appliance washes dishes in all racks.
To wash only the specific rack, press this
button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (option is OFF and
the appliance will wash dishes in all racks).
Remember to load the upper or lower
rack only, and to reduce the amount of
detergent accordingly.
BOOST
The boost option delivers a cut 25%-67%
of the duration for main cycles, while
ensuring an optimal level of washing and
drying. In order to do that it will require
water and energy consumption compared
to the regular full-lenght cycle. The option
can be selected on programs: Eco 50°,
Dynamic Sensor 50-60°, Glass 45°.
DYNAMIC CLEAN
Thanks to the additional power jets this op-
tion provides a more intensive and power-
ful wash in the lower rack, in the specific
area. This option is recommended for
washing pots and casseroles. Press this but-
ton to activate DYNAMIC CLEAN (the in-
dicator lights up).
TABLET (Tab)
This setting allows you to optimize the per-
formance of the program according to the
type of detergent used.
Press the TABLET button (the indicator
light will light up) if you use combined de-
tergents in tablet form (rinse aid, salt and
detergent in 1 dose).
If you use powder or liquid detergent,
this option should be off.
OPERATION INDICATOR
A LED light projected on the floor indicates
that the dishwasher is working. One of the
following operating modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on
for few seconds, stays off during the cy-
cle and flashes at the end of the cycle.
c) The light stays on during the cycle and
flashes at the end of the cycle (default
mode).
If the delayed start was set, the light goes on either
for the first few seconds or the entire duration of the
countdown, based on whether mode b) or c) was set.
The light goes off every time the door is opened. To
select the mode you prefer, switch on the machine,
hold down button P until one of the three letters ap-
pears on the display, press button P until you reach
the desired letter (or mode), hold down button P to
confirm the selection.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding
LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments