KitchenAid KCZCX 20900L Instruction for Use download pdf (Page 12)

How to adjust the temperature for different requirements

Each model has been carefully tested before

leaving the factory and is adjusted in such a way to

ensure high performance and low consumption.

Usually, it is not necessary to modify the settings.

Nevertheless, according to special needs, it is

possible to modify the set temperatures as follows:

Refrigeration Compartment

From +2°C to +8°C (from 35.6°F to 46.4°F), the

recommended preset temperature is +5°C (41°F).

To adjust the temperature use the Up/Down buttons

Upon touching these buttons the newly set

temperature will appear in the display. To modify

this temperature, use the buttons until reaching the

desired temperature.

Dynamic 0° Compartment

From -2°C to +2°C (from 28.4°F to 35.6°F), the

recommended preset temperature is 0°C (32°F).

To adjust the temperature use the Up/Down buttons

Upon touching these buttons the newly set

temperature will appear in the display. To modify

this temperature, use the buttons until reaching the

desired temperature.

Freezer Compartment (Multi-temperature)

From -15°C to -22°C (from 5°F to -7.6°F), the

recommended temperature is preset at -18° (0°F).

To adjust the temperature use the Up/Down buttons

Upon touching these buttons the newly set

temperature will appear in the display. To modify

this temperature, use the buttons until reaching the

desired temperature.

In case the compartment is used as refrigerator or

Fresco compartment (TriMode function) the

recommended and preset temperatures will

correspond to those indicated for the respective

compartments.

The temperature shown can vary slightly in

respect to the set temperature following frequent

openings of the doors or insertion of room

temperature foods or large quantities of foods.

6 to 12 hours are necessary to reach the selected

temperature.

Ice Maker Activation

The Ice Maker button located on the main

control panel permits activation of the automatic

icemaker.

The button is lighted when the icemaker is

functioning.

A prewash of the hydraulic circuit should be

performed before activating the Ice Maker for the

first time. To do this touch at the same time buttons

Enter and Ice Maker .

After a few minutes the Ice Maker can be activated.

Do not activate the Ice Maker unless the

appliance is connected to the water mains.

An integrated control system provides information through lighted signals or text messages visualized on

the display.

The information signal is always visualized with a fixed text message, while a malfunction signal is

visualized with blinking text.

The sound signal that accompanies some malfunction signals can be deactivated by pressing the Alarm

button on the main control panel.

The list of malfunction signals is located at the back of this manual.

Information and malfunction messages on the display

1 ... 11 12 13 ... 36

Comments to this Manuals

No comments

KitchenAid KCZCX 20900L Instruction for Use Page 12

Comments to this Manuals

Related products and manuals for Fridge-freezers KitchenAid KCZCX 20900L