KHGH 7510/I/01Instructions for useGB
The electrical connections must comply with current legislation and be carried out by a qualified, competent person. • Information on the voltage and
Note: Refer to the table on page 6 to ensure the correct type ofinjector is to be fitted.Traditional burners (T)1. Remove the pan supports (A).2. Remo
To fit the double crown wok burner:Insert in the following order:1. burner ring (A);2. decorative covering ring (B);3. external burner cap (C);4. inte
Always disconnect the hob from the electricalpower supply and wait until it cools beforecleaning and/or doing maintenance work.In order to keep your h
If the hob is not working properly work throughthe this guide before contacting our CustomerCare Centre.The burner does not ignite, or the flame isuns
5019 719 01153Printed in Italyn05/08NLWhirlpool Europe S.r.l.Viale G. Borghi, 27 - 21025 Comerio (VA)Phone 0332.759111 - Fax 0332.759268www.whirlpool.
Product description and symbols 4Using the burners 4Practical advice on using the hob 5Positioning the pan supports and wok support 5Hood and cabinetr
1. Removable pan supports2. Auxiliary burner3. Semi-rapid burner4. Semi-rapid burner5. Professional wok burner6. Auxiliary burner control knob7. Semi-
Read the instructions to get the best out of yourhob.- Use pans with a similar diameter to the burner(see the table on this page)- Use flat bottomed
If a hood is to be installed above the hob, refer to the hood installation instructions to ensure the correctheight above the hobNote: If the distance
To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation.• These instructions are only valid in th
PackingThe packing material is 100% recyclable and islabelled with the recycling symbol . Pleasedispose of all packing responsibly and carefully.Prod
Technical information for the installer• This appliance can be built into a 20mm to40mm thick worktop.• If no oven is to be installed below the hob,
Comments to this Manuals