KitchenAid KD-27A User Manual

KD-27A SERIES DISHWASHERS INSTALLATION INSTRUCTIONS FORM 4171083 (153138) 3-86

To maintain dishwasher position and alignment, locate the adjustable brackets at the upper tank corners as shown in Fig. 13 and secur

5 CONNECTING THE DRAIN LINE Remove the red plug from the dishwasher check valve and use a hose clamp (not supplied) to connect the

7 FlNAL CHECK LIST Open the dishwasher door and remove all cardboard, and literature. DO NOT remove the white plastic plug buttons

8 FRONT PANEL VARIATIONS Vari-Front Panel Pack - All KitchenAid dishwashers are equipped with reversible front panels. If you wish to

9 SEASONAL STORAGE - CAUTION - To protect against possible rupture of the fill valve, water lines leading to the diwasher, as well

THIS PAGE INTENTIONALLY LEFT BLANK

KitchenAid Major Appliances FORM 4171083 (153138) 3-86 PRINTED IN U.S.A.

THIS PAGE INTENTIONALLY LEFT BLANK

BEFORE STARTING: Please read these installation instructions COMPLETELY AND CAREFULLY. They will save you time, work, and help to ensu

SPECIFICA T/O/W Electrical Operating Load Maximum Protective Device Size Minimum Circuit Size Water Temperature Water Pressure (Flowing) Cabi

1 CHOOSING THE LOCA T/ON For easy access to plumbing, it is most convenient to have your dishwasher located near the kitchen sink. A

2 PREPARING THE LOCATION Access holes in the cabinets, floor, or rear wall for the hot water supply line, drain line, and electri

For service convenience, a shut-off valve (not supplied) should be installed in the supply line in a readily accessible location (such

ELECTRICAL SUPPLY WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL CODES.

3 PLACING THE DISHWASHER IN ITS LOCATION The adjustable kickboard and lower panel (Fig. 9) must be removed for access to dishwasher