KitchenAid KCBDX 88900 User's Guide Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
6
TEMPERATURE*: Indicator light: To identify the coldest area in the refrigerator.
1. Check that “OK” appears dearly on the indicator light (see diagram).
2.
If the word “OK” does not appear it means that the temperature is too high: Adjust the
REFRIGERATOR OPERATION knob to a higher (colder) position and wait approximately 10 hours
until the temperature has stabilized.
3. Check the indicator light again: If necessary, readjust it in accordance with the above step. If
large quantities of food have been added or if the refrigerator door has been opened frequently,
it is normal for the indicator not to show “OK”. Wait at least 10 hours before adjusting the
REFRIGERATOR OPERATION knob to a higher setting.
* Available only on certain models.
Hints and Tips
Defrosting the appliance
The refrigerator has an automatic defrosting function: Water is ducted to the
back of the appliance via a special discharge outlet, (see diagram) where the
heat produced by the compressor causes it to evaporate. It is therefore not
necessary to defrost the refrigerator manually. It is, however, necessary to
clean the discharge hole regularly so that the water can ow out easily.
Avoiding mould and unpleasant odors
The mold is manufactured with hygienic materials which are odor-free. In
order to maintain an odor-free refrigerator and to prevent staining, food
must always be covered or sealed property.
If you want to switch the appliance off for an extended period of time, clean the inside and leave
the doors open.
Replacing the light bulb*
To replace the light bulb in the refrigerator compartment, pull out the plug
from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the diagram.
Replace it with a similar light bulb within the power range indicated on the
cover (max 10W).
Cleaning
Before cleaning or carrying out maintenance operation, unplug the appliance from the mains or
disconnect the electrical power supply.
Never use abrasives. Never clean refrigerator parts with ammable uids.
Do not use steam cleaners.
The buttons and control panel display must not be cleaned with alcohol or alcohol-derived
substances, but with a dry cloth.
Clean the appliance occasionally with a cloth and a solution of warm water and neutral cleaning
agents specically designed for cleaning the inside of a refrigerator.
Page view 5
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments