KitchenAid KHMD4 60510 Instruction for Use download pdf (Page 10)

The electrical connections must comply with current

legislation and be made by a suitably qualified

professional.

• Information on the voltage and power consumed is provided on

the rating plate.

• The appliance must be earthed.

• When installing the appliance, we recommend fitting an all-

pole disconnection device with contacts that open 3 mm.

• If damaged, the power supply cable must be replaced with

an identical one (H05V2V2-FT90 ºC or H05RR-F). We

recommend that you have this work carried out by our After-

sales Service. Please contact our Customer Care Centre on

00800-3810-4026.

• Do not use extension cables.

• The manufacturer cannot be held liable for injuries to

persons or pets or for damage to goods caused by failure to

comply with the regulations above.

Earth

(yellow/green)

After cleaning the surface around the edges, fit the seal

provided to the hob as shown in the figure.

Position the hob in the worktop opening, using the dimensions

indicated in the instructions.

Note: The power supply cable must be long enough to allow the

hob to be removed from above.

Use the brackets (A) provided to secure the hob in place. Fit the

brackets into the relevant holes indicated by the arrows and screw

them down depending on the thickness of the worktop (see

following figures).

Installation

Electrical connection

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

KitchenAid KHMD4 60510 Instruction for Use Page 10