KitchenAid KHSP5 86510 Instruction for Use

Instructions for useGBNL

The electrical connections must comply with current legislation and be carried out by a qualified, competent person. • Information on the voltage and

Note: Refer to the table on page 6 to ensure the correcttype of injector is to be fitted.Traditional burners (T)1. Remove the cap (A).2. Remove the sp

Regulating the minimum flow level must be done with the tap at thelowest position (small flame) .There is no need to regulate the primary air in the b

Before any cleaning and/or maintenanceoperation, disconnect the hob from powersupply and wait until it is cold.To keep the hob in perfect condition, r

If the hob is not working properly work throughthe this guide before contacting our CustomerCare Centre.The burner does not ignite, or the flame isuns

400010779781Printed in Italyn04/15Whirlpool Europe S.r.l. - Socio UnicoViale G. Borghi, 27 - 21025 Comerio (VA)Phone 0332.759111 - Fax 0332.759268www.

Product description and symbols 4Using the burners 4Practical advice on using the hob 5Positioning the pan supports and wok support (also as spacer) 5

Product description and symbols4quioasweryt1. Removable pan supports2. Semi-rapid burner3. Semi-rapid burner4. Rapid burner5. Auxiliary burner6. Profe

Read the instructions to get the best out of yourhob.- Use pans with a similar diameter to the burner(see the table on this page)- Use flat bottomed

Hood and cabinetry clearances (mm)6Note: If the distance “A” between the wall cupboards in the kitchen isbetween 600mm and 730mm, the height “B” must

To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation.• These instructions are only valid in th

PackingThe packing material is 100% recyclable and islabelled with the recycling symbol . Pleasedispose of all packing responsibly and carefully.Prod

Technical information for the installer• This appliance can be built into a 30mm to70mm thick worktop.• If no oven is to be installed below the hob,