KitchenAid Freestanding Gas Ranges User Manual download pdf (Page 15)

Natural Gas Conversion

1. Turn manual shutoff valve to the closed position.

2. Unplug range or disconnect power.

To Convert Gas Pressure Regulator

1. Remove oven racks from inside the oven cavity.

2. Remove the storage drawer. See “Replace Oven Racks and

Storage Drawer” section.

3. Remove the oven door. See “Oven Door” section in the Use

and Care Guide for oven door removal instructions.

4. Using a Phillips screwdriver, remove the 2 oven bake burner

cover screws located at the rear of the oven.

5. Lift up and remove oven bake burner cover.

6. Remove the 3 bake burner screws and set aside.

7. Swing the bake burner to the side and lift it off the oven

orifice and set aside.

8. Locate gas pressure regulator at the rear of the range.

IMPORTANT: Do not remove the gas pressure regulator.

9. Unscrew the regulator cap and remove the plastic cover.

10. Flip the regulator cap over and replace the plastic cover.

11. Screw the regulator cap securely back into place. Do not

overtighten.

A. To range

B. Shutoff valve (closed position)

C. Gas supply line

A. Bake burner cover

B. Bake burner cover screws

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death

or serious burns to children and adults.

A. Oven orifice

B. Bake burner screws

A. Plastic cover

B. Regulator cap

A. LP gas position

B. Natural gas position

C. Plastic cover

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

No comments

KitchenAid Freestanding Gas Ranges User Manual Page 15