KHDF 1160KHDS 1160Instructions for useGB
The electrical connections must comply with currentlegislation and be carried out by a qualified, competentperson.• Information on the voltage and pow
Important: The following procedure shall be carried out bycompetent technical personnel only. The hob can beinstalled on different types of materials,
Note: Refer to the injector table to ensure the correct type ofinjector is to be fitted.Traditional burners (T)1. Remove the pan supports (A).2. Remov
To fit the double crown wok burner:Insert in the following order:1. burner ring (A);2. decorative covering ring (B);3. external burner cap (C);4. inte
Always disconnect the hob from the electricalpower supply and wait until it cools before cleaningand/or doing maintenance work. in order to keepyour h
If the hob is not working properly, work throughthis guide before contacting our Customer CareCentre.The burner does not ignite, or the flame isunstea
5019 719 01161Printed in Italyn04/08FWhirlpool Europe S.r.l.Viale G. Borghi, 27 - 21025 Comerio (VA)Phone 0332.759111 - Fax 0332.759268www.whirlpool.e
Product description and symbols 4Using the burners 4Practical advice on using the hob 5Positioning the pan supports and wok support 5Hood and cabinetr
1. Removable pan supports2. Auxiliary burner3. Semi-fast burner4. Semi-fast burner5. Professional wok burner6. Auxiliary burner control knob7. Semi-fa
Please read all these instructions to get the bestout of your hob.• Use pans with a similar diameter to theburner(see the table).• Use flat bottomed p
Category II2E+H3+Electric Power: 230 V ~ 50 HzIf a hood is to be installed above the hob, refer to the hoodinstallation instructions to ensure the hoo
To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation.• These instructions are only valid in the
PackingThe packing material is 100% recyclable and islabelled with the recycling symbol . Pleasedispose of all packing responsibly and carefully.Prod
Technical information for the installer• Warning: this is a heavy products whichrequires the installation to be carried outby two people.• When instal
Comments to this Manuals