KitchenAid KOTSP 60600 Instruction for Use Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
23
SETTINGS
1. To change some display settings, select "SETTINGS" from the main menu menu by turning the
"Functions" knob.
2. Confirm by pressing : the display shows which settings can be changed (language, volume of
acoustic signal, display brightness, time, energy saving function, power).
3. The setting to be changed by turning the "Browse" knob.
4. Press button to confirm.
5. Follow the instructions of the display to change the settings.
6. Press button ; a message appears on the display confirming your selection.
N.B: When the oven is switched off, if the ECOMODE (Energy saving) function is selected (ON), the
display switches off after a few minutes, showing the clock. To view information on the display and switch
the light on again, just press any of the buttons or turn one of the knobs. During a cooking function if the
ECOMODE is activated the cavity lamp will be switched off after 1 minute of cooking and reactivated for
each user interaction. If, on the other hand, the function is not selected (OFF), after a few minutes the
display is merely dimmed.
KEY-LOCK
This function can be used to lock the control panel buttons.
To activate it, press and at the same time for at least 3 seconds.
If activated, the functions of the buttons are locked and the display shows a message and the symbol .
This function can also be activated during cooking.
To deactivate it, repeat the above procedure. When the key-lock function is activated, the oven can only
be switched off by turning the knob to 0 (zero). In this case, however, the previously selected function will
have to be set again.
Instructions for oven use
FAVOURITES
This oven allows you to memorize the settings used to cook
your favourite dishes.
At the end of cooking, if you wish to save the settings used
(function, time, temperature...), press the button.
At this point, the display shows the message "Presse to
save".
Press button and the oven will propose the first available
position from 1 to 10. If you wish to customize the position, you
can change the number by turning the "BROWSE" (+/-) knob
before confirming your choice with button .
When the memory is full or the position is already in use, the
function is overwritten.
If, on the other hand, you do not wish to memorize the settings,
simply press the button , proceed to another function by
turning the "BROWSE" knob or switch off the oven. To subsequently view saved settings, turn the
"FUNCTIONS" knob until the display shows the symbol then select one of the stored functions,
turning the "BROWS" (+/-) knob until the desired function is displayed.
Press button followed by button to start cooking.
Press to save to cancel
Favourite has been saved
Forced air2
Press to save to cancel
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments