KitchenAid KHMP5 86510 Instruction for Use download pdf (Page 11)

Note: Refer to the table on page 6 to ensure the correct type

of injector is to be fitted.

Traditional burners (T)

1. Remove the cap (A).

2. Remove the spreader (B).

3. Unscrew the injector (C) with a box spanner 7.

4. Replace the injector with the one for the new gas.

5. Put back burners and pan supports.

Note: Before installing the hob, please remember to stick the

gas calibtration label, provided with the replacement injectors

over the gas information on the underside of the hob.

Replacing the injectors

If you are using a different kind of gas from the one

indicated on the serial no. plate and the orange

label on the back of the hob, you must replace the

injectors; in the case of the Wok burner, adjust the

primary air (see Injector table on page 6).

The orange label should be removed and kept

together with the manual.

Use pressure regulators suitable for the gas

pressures indicated on page 6

• In order to replace the injectors, contact the

Customer Care Centre on 00800-3810-4026,

or a qualified electrician.

• Injectors not supplied as standard should be

requested from the Customer Care Centre on

00800-3810-4026.

• Regulate the minimum levels of the taps.

Note: with liquid petroleum gas ( G30/G31)

the bypass screw must be screwed in fully. If

you then experiance difficulty in turning the

control knob, contact our After sales Service

though our Customer Care Centre on

00800-3810-4026, who will arrange for a

replacement after ascertaining that the tap is

damaged.

Adaption to a different type of gas supply

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

KitchenAid KHMP5 86510 Instruction for Use Page 11