KitchenAid KHDS 1160/I Instruction for Use download pdf (Page 4)

1. Removable pan supports

2. 1 kWh auxiliary burner

3. 1.65 kWh semi-fast burner

4. 1.65 kWh semi-fast burner

5. Professional wok burner

6. Auxiliary burner control knob

7. Semi-fast burner control knob

8. Semi-fast burner control knob

9. Professional wok burner control knob

Control Symbols

Off

Maximum flame

Minimum flame

Product description and symbols

To turn on one of the burners:

1. Turn the corresponding control knob

anticlockwise until the indicator coincides with

the maximum flame symbol .

2. Press the control knob to ignite the burner.

3. Once the burner has lit, keep the control knob

pressed for about 5 seconds to allow the safety

thermocouple fitted to each burner to engage.

The thermocouple will switch off the gas supply

to the burner should the flame be accidentally

lost ( A gust of air, momentary interruption of

gas supply or liquid spillage etc).

If the burner does not ignite within about 15

seconds, switch off the burner, check the

fitting of the burner cap and plate for correct

fitting. Wait at least 1 minute before trying

again.

If the burner goes out when the control knob

is released, the thermocouple did not engage.

wait al least 1 minute before repeating strps 1

to 3.

Sometimes, when switching on the WOK’s

burner when cold, the external crown may

take from 2 to 5 seconds to come on. This is a

normal behaviour, due to the time taken for

the gas to reach the crown itself.

Using the burners

4

1 2 3 4 5 ... 16

Comments to this Manuals

No comments