KitchenAid KCVWX 20600L Installation Manual download pdf (Page 10)

Operate as follows:

•

Unwind the electric cable and connect it directly to

the wall socket.

•

Make sure the appliance is in the Stand-by condition

and that all lights are off; should it be not so press the

Unit button to switch it off.

•

Fit one end of the water hose onto the connector at

the appliance’s back 1.

•

Fit the other end of the hose to the water tap, use the

gaskets provided in the Owner’s Kit 2.

Electrical and Water connection

Adjust the appliance level by means of the front

levelling feet and the rear adjustable wheels.

Operate as follows:

•

After removing the bottom plinth or grille (it is kept

in position by magnets), adjust the height of the

levelling feet 1 by means of a 17 mm (3/4” in) open

spanner.

•

Then adjust the height of the rear wheels by turning

the front adjusting bolts 2 clockwise or anticlockwise

as it may be required.

•

Remount the bottom plinth or grille.

Back of appliance

Water connection

Levelling

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

KitchenAid KCVWX 20600L Installation Manual Page 10