KitchenAid KCVWX 20600L Installation Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
25
Check that the front levelling feet have been properly installed.
Check that the connection to the water system does not have any leaks and that the closing tap is easily
accessible.
Check that the electrical connection is correctly installed and that the multipole switch and socket are
easily accessible.
Check the perfect alignment of the appliance with adjacent structures.
Check that all adhesive tape and external or internal temporary protective devices have been removed.
Check the perfect closing of the doors and the smooth sliding of the drawers and shelves.
Post installation control
To start the appliance, connect the plug to the
electrical mains: at this point, when opening the
door, the control panel will usually visualize the
message “Stand by”, and all the panel keys be off.
To turn on all the appliance compartments, press
the Unit button for three seconds. The display
will show the message “Initial test” for approx. 2
minutes. After this phase the compressors will
start up and remain on until the default
temperature set up in the factory is reached. Do
bear in mind that this condition could last several
hours.
If the appliance is provided with an Ice Maker,
prior to switch it on make sure that the water filter
cartridge is installed, then fill the water system. To
this purpose switch off the Ice Maker. Touch the
Enter and Ice Maker buttons at the same
time, to start the filling which may last a few
minutes.
At the end switch the Ice Maker on again by
touching the button.
For further information about the appliance
operation, refer to the User Manual.
Ifatthefirststart-upthemessageStandbydoesnotappear,butothermessagesappear,suchas
Fridgetoowarm,Frescotoowarm,Freezertoowarm,orsoundsignalsareactivated,itmeans,it
meansthattheappliancehasalreadystartedthecoolingprocess.
Ifthisisthecase,deactivateanypossibleacousticsignalsbypressingtheAlarmbutton,closethe
doorandwaituntilthesettemperatureisreached.
Itisnecessarytolettheunitreachthecorrecttemperaturebeforefoodsarestoredinside.
Start up
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments