KitchenAid KGCV465 User Manual download pdf (Page 7)

Dual Valve TripleTier™ Flame Burner

Gas tube opening

Gas must flow freely throughout the gas tube opening for the

burner to light properly. Keep this area free of soil and do not

allow spills, food, cleaning agents or any other material to enter

the gas tube opening. Protect it from spill overs by always using a

burner cap.

Standard Burner

TripleTier™ Flame Burner

Burner ports

Check burner flames occasionally for proper size and shape as

shown above. A good flame is blue in color, not yellow. Keep this

area free of soil and do not allow spills, food, cleaning agents or

any other material to enter the burner ports.

To Clean:

Remove the burner cap from the burner base and clean

according to “General Cleaning” section.

Clean the gas tube opening with a damp cloth.

Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden

toothpick. If the burner needs to be adjusted, contact a

trained repair specialist.

Replace the burner cap, making sure the alignment pins on

the cap are properly aligned with the burner base.

Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the

sealed burner yourself. Contact a trained repair specialist.

1. Dual Valve TripleTier™ Flame

Burner Caps

2. Burner base

3. Alignment pins

4. Igniter

5. Gas tube opening

1. 1-1

¹⁄₂

in. (25-38 mm)

2. Burner ports

³⁄₄

in. (19.1 mm)

³⁄₈

in. (9.53 mm)

3. Burner ports

1. Incorrect

2. Correct

221

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

KitchenAid KGCV465 User Manual Page 7

Comments to this Manuals

Related products and manuals for Cookers KitchenAid KGCV465