KitchenAid 5KFPM775 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
English
11
Preparing the Food Processor for Use
4. The 2-piece cone offers two sizes;
choose the right size for the fruit you
are juicing. Use the outer cone for
grapefruit, oranges and other large
fruits. Remove the outer cone to reveal
a smaller inner cone that’s perfect for
lemons and limes.
5. Open the lid and place the cone inside
the strainer basket over the power
shaft. It may be necessary to rotate the
cone until it falls into place.
6. Halve the fruit to be juiced.
7. Place fruit half on cone.
8. Close the lid of the strainer basket.
Hold the lever arm down firmly with an
open palm to maintain even pressure.
Operate the citrus press only when
the lever arm is in the down position,
holding the fruit on the cone.
NOTE: Use of the citrus press without the
clip-on lever arm is not recommended. If
you do use it without the lever arm, remove
the lever arm from the basket (see step 14).
9. Operate the citrus press by pressing
the “I” Button or the “Pulse” Button.
10. When juice is fully extracted, press the
“O” Button.
NOTE: Do not exceed the maximum liquid
level line (see page 12) on the work bowl,
or juice will leak from the bowl.
11. Unplug the Food Processor.
12. Unlock the strainer basket by turning
it clockwise. Remove juiced fruit, cone,
and strainer basket from the work
bowl.
13. Remove the work bowl from Food
Processor and pour juice into desired
container.
14. The lever arm can be unclipped from
the strainer basket for thorough
cleaning. To detach, pull the clip at the
bottom of the basket away from the
basket side and remove the lever arm
from the basket.
15. When reattaching the lever arm to the
strainer basket, make sure the tab on the
handle snaps securely into the slot on
the basket.
On
Off
Pulse
On
Off
Pulse
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments