KitchenAid KBBL206ESS Installation Guide download pdf (Page 20)

Install Overlay Custom Panels

IMPORTANT:

■ Install the custom handles prior to installing the panels on

the refrigerator. For more information on KitchenAid

custom handle selection, refer to the KitchenAid Catalog,

visit www.kitchenaid.com, or call 1-800-422-1230.

In Canada, visit www.kitchenaid.ca, or call

1-800-807-6777.

■ Create custom door overlay panels according to the

specifications in the “Overlay Series Custom Panels”

section.

■ KitchenAid is not responsible for the removal or addition of

molding or decorative panels that would not allow access

to the refrigerator for service.

Door Panel Installation

1. Remove all tape and door bracing from the refrigerator door(s)

and freezer drawer.

2. Open the refrigerator door(s) and freezer drawer and remove

the trims and corner caps on each door as shown.

3. Slide the custom panels into the trims on the refrigerator

door(s) and freezer drawer, making sure that the backer panel

fits into the hinge side trims.

4. Reinstall the trims and corner caps.

5. Remove the film from the screw covers. Snap the screw

covers into the handle trim section.

Top Grille Panel

1. Grasp both ends of the top grille.

2. Push straight up; then pull straight out. Place the top grille

panel-side down on a soft working surface.

A. Corner caps

B. Refrigerator door trims

C. Freezer drawer trim

A. Panels

A. Top grille

B. Cabinet side trims

B BA

1 ... 19 20 21 ... 72

No comments

KitchenAid KBBL206ESS Installation Guide Page 20