KitchenAid KRFC400ESS Use and Care Manual download pdf (Page 10)

NOTE: Door openings are ignored for the first hour after Vacation

mode is activated.

1. On the main menu, press the touch pad next to “Options.”

2. In each of the following screens, continue to press the touch

pad next to “More Options” until “Vac. Mode is Off” appears

on the display.

3. Press the touch pad next to “Vac. Mode is Off” to switch

between ON and OFF. Press the touch pad next to “Done” to

lock in the desired setting and return to the main menu.

Max Cool

The Max Cool feature assists with periods of high refrigerator or

freezer use, full grocery loads, or temporarily warm room

temperatures by lowering the freezer and refrigerator to the

minimum temperatures.

1. On the main menu, press the touch pad next to “Options.”

2. In each of the following screens, continue to press the touch

pad next to “More Options” until “Max Cool is Off” appears on

the display.

3. Press the touch pad next to “Max Cool is Off” to switch

between ON and OFF. Press the touch pad next to “Done” to

lock in the desired setting and return to the main menu.

NOTE: The Max Cool feature will automatically shut off in

approximately 2

hours.

Temp Alarm

The Temp Alarm feature alerts you if the temperature exceeds

normal operating temperatures, for an hour or longer, in either or

both the refrigerator and freezer compartments. An audible alarm

will sound repeatedly, and the highest temperature reached in

each compartment will be displayed.

NOTE: Touch any pad on the control panel to turn off the audible

alarm. Temp Alarm will automatically reset once the warm

condition has been corrected for 30 minutes.

1. On the main menu, press the touch pad next to “Options.”

2. In each of the following screens, continue to press the touch

pad next to “More Options” until “Temp Alarm Is Off” appears

on the display.

3. Press the touch pad next to “Temp Alarm Is Off” to switch

between ON and OFF. Press the touch pad next to “Done” to

lock in the desired setting and return to the main menu.

Replace H2O Filter

See “Water Filtration System.”

User Settings

The control center allows you to set user preferences, if desired.

Language

The language preference allows you to change the control panel

display to English, French or Spanish.

1. On the main menu, press the touch pad next to “User

Settings.”

2. Press the touch pad next to “Select Language.”

3. Press the touch pad next to either “Mettre En Français” or

“Cambiar En Español.” Press the touch pad next to “Confirm”

to lock in the setting and return to the main menu.

Temperature Display

The temperature display preference allows you to change the

control panel display from degrees Fahrenheit to degrees Celsius.

1. On the main menu, press the touch pad next to “User

Settings.”

2. Press the touch pad next to “Fahrenheit Is On” to switch

between Fahrenheit and Celsius. Press the touch pad next to

“Done” to lock in the desired setting and return to the main

menu.

Display Brightness

The Display Brightness preference adjusts the backlight level of

the control panel.

1. On the main menu, press the touch pad next to “User

Settings.”

2. In each of the following screens, continue to press the touch

pad next to “More Settings” until “Display Brightness”

appears on the display.

3. Press the touch pad next to “Lighter” or “Darker” to adjust the

setting between 1 (darkest)

and 5 (lightest). Press the touch

pad next to “Done” to lock in the desired setting and return to

the main menu.

Adjust Light Sensor

The “Adjust LiteSensor” preference allows you to adjust the level

at which the Light Sensor will detect darkness and activate the

Auto On mode for the dispenser light.

1. On the main menu, press the touch pad next to “User

Settings.”

2. In each of the following screens, continue to press the touch

pad next to “More Settings” until “Adjust LiteSensor” appears

on the display.

3. Press the touch pad next to “Lighter” or “Darker” to adjust the

setting between 1 (darkest)

and 9 (lightest). Press the touch

pad next to “Done” to lock in the desired setting.

Alarm Sound

The alarm sound preference allows you to turn off any audible

alarms (door open, too warm, etc.) when quick and simple

remedies are not possible. It will not disable alarm features or

visual displays.

1. On the main menu, press the touch pad next to “User

Settings.”

2. In each of the following screens, continue to press the touch

pad next to “More Settings” until “Alrm Sound Is On” appears

on the display.

3. Press the touch pad next to “Alrm Sound Is On” to switch

between ON and OFF. Press the touch pad next to “Done” to

lock in the desired setting and return to the main menu.

Crisper Humidity Control

You can control the amount of humidity in the moisture-sealed

crisper. Depending on your model, adjust the control to any

setting between FRUIT and VEGETABLES or LOW and HIGH.

FRUIT/LOW (open) for best storage of fruits and vegetables with

skins.

VEGETABLES/HIGH (closed) for best storage of fresh, leafy

vegetables.

Ice Maker and Ice Storage Bin

IMPORTANT:

■ Flush the water system before turning on the ice maker. See

“Water and Ice Dispenser.”

■ The ice maker and storage bin are located in the upper left-

hand side of the refrigerator compartment.

Turning the Ice Maker On/Off

The On/Off switch is located on the ice maker.

To turn on the ice maker, press the switch to the ON position.

To manually turn off the ice maker, press the switch to the OFF

position.

NOTE: Your ice maker has an automatic shutoff. The ice maker

sensors will automatically stop ice production, but the control will

remain in the ON position.

Removing and Replacing Ice Storage Bin

To Remove the Ice Storage Bin:

1. Hold the base of the storage bin and press the release button

on the lower right.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comments to this Manuals

No comments

KitchenAid KRFC400ESS Use and Care Manual Page 10

Comments to this Manuals

Related products and manuals for Fridges KitchenAid KRFC400ESS