Kitchenaid KGCV566 User Manual download pdf (Page 10)

Surface Burners

IMPORTANT:

Do not obstruct the flow of combustion and

ventilation air around the burner grate edges.

Before cleaning, make sure all controls are off and the oven and

cooktop are cool. Do not use oven cleaners, bleach or rust

removers.

Burner cap:

Always keep the burner cap in place when using a

surface burner. A clean burner cap will help prevent poor ignition

and uneven flames. Always clean the burner cap after a spillover

and routinely remove and clean the caps according to the

“General Cleaning” section.

Gas tube opening:

Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other

material to enter the gas tube opening. Protect it from spill overs

by always using a burner cap.

Burner ports:

Check burner flames occasionally for proper size

and shape as shown above. A good flame is blue in color, not

yellow. Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

To Clean:

Remove the burner cap from the burner base and clean

according to “General Cleaning” section.

Clean the gas tube opening with a damp cloth.

Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden

toothpick. If the burner needs to be adjusted, contact a

trained repair specialist.

Replace the burner cap, making sure the alignment pins on

the cap are properly aligned with the burner base.

Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the

sealed burner yourself. Contact a trained repair specialist.

Surface Grates with Locator Pin

(on some models)

Surface Grates

The grates located on the left and right side of the cooktop

contain grooves. These grooves must always face inward toward

the control knob panel to hold the grates in place. On some

models, the middle grate must be placed in position first,

followed by the left and right grates.

1. Burner cap

2. Burner base

3. Alignment pins

4. Igniter

5. Gas tube opening

1. 1-1

¹⁄₂

in. (25-38 mm)

2. Burner ports

1. Incorrect

2. Correct

1. Left Grate

2. Groove

3. Middle Grate

1 ... 9 10 11 ... 28

Comments to this Manuals

No comments

Kitchenaid KGCV566 User Manual Page 10

Comments to this Manuals

Related products and manuals for Hobs Kitchenaid KGCV566