KitchenAid KHGD5 86510 Instruction for Use download pdf (Page 10)

The electrical connections must comply with current

legislation and be made by a suitably qualified

professional.

• Information on the voltage and power consumed is provided on

the rating plate.

• The appliance must be earthed.

• When installing the appliance, we recommend fitting an all-

pole disconnection device with contacts that open 3 mm.

• If damaged, the power supply cable must be replaced with

an identical one (H05V2V2-FT90 ºC or H05RR-F). We

recommend that you have this work carried out by our After-

sales Service. Please contact our Customer Care Centre on

00800-3810-4026.

• Do not use extension cables.

• The manufacturer cannot be held liable for injuries to

persons or pets or for damage to goods caused by failure to

comply with the regulations above.

Earth

(yellow/green)

1. After cleaning the surface around the edges, fit the seal provi-

ded.

2. Position the hob in the opening, maintaining the clearances bet-

ween the hood and/or cabinets indicated on page 6.

3. Use the brackets (A) provided to secure the hob to the worktop

with screws.

Note: The power supply cable must be long enough to allow the

hob to be removed from above.

Installation

Electrical connection

1 ... 9 10 11 12 13 14 15 16

No comments

KitchenAid KHGD5 86510 Instruction for Use Page 10