4
1. Removable pan supports
2. 1 kWh auxiliary burner
3. 1.75 kWh semi-rapid burner
4. 3 kWh rapid burner
5. 1.75 kWh semi-rapid burner
6. Professional wok burner
7. Auxiliary burner control knob
8. Semi-rapid burner control knob
9. Rapid burner control knob
10.Semi-rapid burner control knob
11.Professional wok burner control knob
To switch on one of the burners:
1. Turn the relevant control knob anticlockwise
until the indicator is at the maximum flame
symbol .
2. Press the control knob to ignite the burner.
3. Once the burner has lit, hold the control knob
down for approx. 5 seconds to allow the safety
thermocouple fitted to the burner to engage.
The thermocouple will cut off the gas supply
to the burner if the flame goes out accidentally
(e.g. due to a gust of air, momentary
interruption of the gas supply or liquid
spillage).
To switch on the professional burner:
1. To switch on both rings at the same time, turn
the control knob anticlockwise to the outer
ring/inner ring maximum flame symbol, then
press the control knob to ignite the burner.
2. To keep only the inner ring lit, press the
control knob and turn it anticlockwise to the
inner ring maximum flame/outer flame
switched off symbol.
If the burner does not ignite within approx. 15
seconds, switch off the burner and check that
the burner cap and plate are fitted correctly.
Wait at least 1 minute before trying again.
If the burner goes out when you release the
control knob, this means that the
thermocouple did not engage. Wait at least 1
minute before repeating steps 1 to 3.
Using the burners
Control symbols
Standard burners Professional burners
OFF OFF
Maximum flame Outer ring maximum flame/inner ring maximum flame
Minimum flame Outer ring minimum flame/inner ring maximum flame
Inner ring maximum flame/outer ring switched off
Inner ring minimum flame/outer ring switched off
Product description and symbols
Comments to this Manuals