Kitchenaid KEMS378 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
Off
The OFF key stops any upper or single oven function except for
the Clock, Timer and Control Lock.
The oven will also turn off when the door is opened. When the
door is opened, the element(s) and fan will turn off, but the oven
light will remain on. Close the door and touch START to resume
the preset cycle (except for sensor cooking).
The oven cooling fan may continue to operate even after an oven
function has been canceled or completed, depending on the
oven temperature.
Clock
This is a 12-hour clock. Before setting, make sure the oven,
Timer, and Timed Cooking are off.
To Set:
1. Touch CLOCK SET/START.
2. Touch the number keys to set the time of day.
3. Touch CLOCK SET/START again.
Tone s
Tones are audible signals, indicating the following:
One beep
Valid key touch
Oven is preheated
Function has been entered
One chime
Preheat cycle has been completed
Three beeps
Invalid key touch
End of a cooking cycle
Three chimes
When timer reaches zero
Includes using the Timer for functions other than cooking.
Four beeps
Start key touched when door is open
Door opened during a sensor function
Tone Volume
The volume is preset at high, but can be changed to low.
To Change: Touch OPTIONS and then “3” to toggle volume
between high and low settings.
All Tones
All tones are preset on, but can be turned off.
To Turn Off/On: Touch OPTIONS and then “2” to toggle tones
between On and Off settings.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset
on, but can be turned off. If all tones have been turned off, the
end-of-cycle and reminder tones cannot be independently turned
on.
To Tur n Tones Off/On: Touch OPTIONS and then “4” to toggle
tones between On and Off settings.
Options
(single oven models)
The OPTIONS selection key allows you access to 5 hidden
functions within the Electronic Oven Control. These hidden
functions allow you to change the oven temperature between
Fahrenheit and Celsius, turn the audible signals, prompts, and
turntable on and off.
To Use:
1. Touch OPTIONS. The oven display will scroll through the
various options, starting at 1 and ending automatically at 5.
You can also touch the Options key repeatedly to manually
scroll through the list of options.
2. Touch the number key for the specific option to toggle the
function setup. Use the following chart as a guide.
OPTIONS CHART
Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be
changed to Celsius.
To Change: Touch OPTIONS and then “1” to toggle temperature
between Fahrenheit and Celsius settings.
When in Fahrenheit, “°F” follows the oven temperature.
When in Celsius, “°C” follows the oven temperature.
Timer
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time.
NOTE: The Timer does not start or stop the oven.
To Set:
1. Touch TIMER SET/START.
Touch again to switch between MIN/SEC and HR/MIN.
If no action is taken, the control will continue to wait for a
length of time to be entered.
2. Touch the number keys to set the length of time.
3. Touch TIMER SET/START.
If the key is not touched, the control will continue to wait for
Timer Set/Start to be touched.
When the set time ends, if enabled, end-of-cycle tones will
continuously repeat until the TIMER OFF key is touched.
If the “Off” key is touched, the oven will turn off; however, the
Timer can only be turned off using the Timer “Off” key.
OPTIONS HIDDEN FUNCTION
1 Fahrenheit and Celsius conversion
2Sound On/Off
3 Sound High/Low
4 End tone On/Off
5 Turntable On/Off
Page view 8
1 2 3 4 5 6 7 8 9 10 ... 44

Comments to this Manuals

No comments