KitchenAid Freestanding Gas Ranges User Manual download pdf (Page 8)

Install Anti-Tip Bracket

1. Remove the anti-tip bracket that is taped in the storage

drawer.

2. Determine which mounting method to use: floor or wall.

If you have a stone or masonry floor you can use the wall

mounting method.

3. Determine and mark the edge of the range in the cutout

space. The mounting bracket can be installed on either the

left side or right side of the cutout. Position mounting bracket

in cutout so that right (or left) edge of the bracket is

⁹⁄₁₆" (14.5 mm) from the marked edge of the range, as shown.

4. Drill two ¹⁄₈" (3.0 mm) holes that correspond to the bracket

holes of the determined mounting method. See below.

Floor Mounting

Wall Mounting

5. Using the Phillips screwdriver, mount anti-tip bracket to the

wall or floor with the two #12 x 1⁵⁄₈" screws provided.

Make Gas Connection

Typical flexible connection

1. Apply pipe-joint compound made for use with LP gas to the

smaller thread ends of the flexible connector adapters (see B

and G in the following illustration).

2. Attach one adapter to the gas pressure regulator and the

other adapter to the gas shutoff valve. Tighten both adapters.

A. Anti-tip bracket

B. Mark edge of range.

C. ⁹⁄₁₆" (14.5 mm)

A. #12 x 1⁵⁄₈" screws

B. Anti-tip bracket

A. #12 x 1⁵⁄₈" screws

B. Anti-tip bracket

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure

gas pressure does not exceed 14" (36 cm) water

column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and

authorized service personnel.

Failure to do so can result in death, explosion, or fire.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments

KitchenAid Freestanding Gas Ranges User Manual Page 8

Comments to this Manuals

Related products and manuals for Cookers KitchenAid Freestanding Gas Ranges