Kitchenaid KGRT607 User Manual download pdf (Page 61)

61

Troubleshooting

continued on next page

WHAT TO DO

No action is needed. Burner

operation is not affected and the

sparking should end when the knob

is moved from LITE.

Turn on one or two burners or

disconnect electrical supply to let

switch dry out.

Contact service technician to

replace module.

Contact a qualified electrician to

correct wiring, if needed.

No action is needed.

Push control knob(s) in before

turning to a setting.

Wait for the start time to be reached,

or cancel and reset the control.

Call a service technician to repair.

Odors are normal when the range is

new. The odors will disappear as the

oven is used.

This moisture will evaporate during

oven usage.

PROBLEM

Burners spark

Cooling fan

runs during

BAKE , BROIL,

or CLEAN

The convection

fan does not

run all the time

The control

knob(s) will not

turn

The Self-

Cleaning cycle

will not operate

Odor from

oven

Moisture in

door glass

POSSIBLE CAUSE

It is normal for all four

burners to spark when a

burner is turned on, but has

not yet ignited.

Continuous sparking may be

caused when:

—A spillover has wet ignition

switch contacts.

—There is a faulty spark

module.

—The wall outlet wiring is

incorrect.

It is normal for the fan to

automatically run while the

oven is in use to cool the

electronic control.

It is normal for the convec-

tion fan to cycle on and off

during the CONVECTION

BROIL mode. The timer dis-

play shows the fan running

continuously.

You are not pushing in

before turning.

You have programmed a

delayed start time.

The cooling fan is not

running. If fan is running, you

can hear it.

Heating of insulation.

It is normal for moisture to

appear in the door glass as

the oven heats up.

9753620Av03c72 7/1/99 11:42 AM Page 61

1 ... 60 61 62 ... 136

Comments to this Manuals

No comments