KitchenAid 740-0781 Instruction Manual download pdf (Page 12)

INSTALLATION INSTRUCTIONS

Unpack Grill

1. Remove all pack

aging materials and remove grill from the shipping

base.

2. Move grill close to desired outdoor location.

3. Open the grill hood.

4. Using an utility knife to cut yellow straps and packing tape to open

box from top and remove the boxes.

5. Remove the warming shelf and grill grates from inside the grill and

remove the package inside the firebox.

6. Remove foam block and wrap from inside the grill.

7. Replace the grill grates.

8. Place warming shelf on brackets as shown.

9. Dispose of/recycle all packaging material.

Install 20

lb LP

Gas Fuel T

nk Tray

The tank tray should be secured to a fixed

location that can be easily

accessed and will allow the gas pressure regulator/hose assembly to

connect to the 20 lb LP gas fuel tank without kinking or putting strain on

the gas pressure regulator/hose assembly.

1. Place the tank tray in a location that can be secured using



4 screws (supplied) through the predrilled holes.

2. Use 4 screws to secure the tank tray. The typical location for a 20 lb

LP gas fuel tank is within the enclosure where the tank ban be turned

on and off easily.

A. Warming rack brack

ets

B. Warming rack

Excessive Weight Hazard

Use two or more people to move and install grill.

WARNING

Failure to do so can result in back or other injury.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

No comments

KitchenAid 740-0781 Instruction Manual Page 12