KitchenAid 740-0781 Instruction Manual download pdf (Page 16)

3. Connect the quick connector on the other end of the 

10’

(3.0 m) PVC flexible gas supply hose to the rigid Natural gas

supply pipe (B).

Change Grill Main Burner Valve Orifices

1. Remove th

e grates and flame tamers.

2. Remove the screw and clip that hold the burner in place. Set the

screw and clip aside. Remove the burner from the grill by lifting the

burner out.

3. Use a 6 mm socket and wrench or 6 mm nut driver to remove the

brass orifice from the end of gas valve. The main burner NG orifice is

located behind the LP orifice, so no additional orifice needs to be

installed.

4. Reinsert the burner and reattach using the screw and the clip

previously removed. Repeat the procedure for each main burner.

5. Position th

e igniters so they are

¼" (6.0 mm) away from each burner.

Change the Rotisserie/Infrared Burner Orifice

1. Using a Phillips screwdri

ver, unscrew the 2 screws and remove the

rotisserie/infrared burner wind baffle.

A. Brass conne

ctor

B. Quick connector

A. Main burner orifice

A. Wind baffle

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 95 96

No comments

KitchenAid 740-0781 Instruction Manual Page 16