KitchenAid KGRT507 User Manual download pdf (Page 63)

63

Troubleshooting

continued on next page

WHAT TO DO

No action is needed. Burner

operation is not affected and the

sparking should end when the

ignited flame is burning undisturbed.

Turn on one or two burners or

disconnect electrical supply to let

switch dry out.

Contact service technician to

replace module.

Contact a qualified electrician to cor-

rect wiring, if needed.

No action is needed.

Push control knob(s) in before

turning to a setting.

Wait for the start time to be reached,

or cancel and reset the control.

Call a service technician to repair.

PROBLEM

Burners spark

Cooling fan

runs during

BAKE , BROIL,

or CLEAN

The convection

fan does not

run all the time

The control

knob(s) will not

turn

The Self-

Cleaning cycle

will not operate

POSSIBLE CAUSE

It is normal for all four

burners to spark when:

—A burner is turned on, but

has not yet ignited.

—There is a draft blowing on

burners.

—A very large pot on burner

causes flame to be unstable.

Continuous sparking may be

caused when:

—A spillover has wet ignition

switch contacts.

—There is a faulty spark

module.

—The wall outlet wiring is

incorrect.

It is normal for the fan to

automatically run while the

oven is in use to cool the

electronic control.

It is normal for the convec-

tion fan to cycle on and off

during the CONVECTION

BROIL mode. The timer dis-

play shows the fan running

continuously.

You are not pushing in

before turning.

You have programmed a

delayed start time.

The cooling fan is not

running. If fan is running, you

can hear it.

9753310Av15(c70) 12/4/98 10:42 AM Page 63

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 135 136

Comments to this Manuals

No comments